Megan Racing Rear Lower Camber Arm For 09-14 Acura TL TSX / 08-17 Honda Accord

Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.

Megan Racing Inc. has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements.

These rear Lower-Rear Arms are adjustable to fine tune your cars handling in the rear. When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only. Combine with Rear Toe Arms and Rear-Rear Control Arms for the ultimate in adjust-ability.

• Material: Steel Alloy
• Color: Blue
• Surface Finish: Powdercoated
• Type: Control Arm
• Style: Camber Arm
• Placement: Rear Lower
• Hard Rubber bushings for a more direct feel and driving experience
• Improves Suspension, Handling, Predictable Response and even Prevents Premature Tire Wearing
• Ensure Even or Desired Contact with the Ground; i.e. Tires Wear more Evenly and Increases Traction and Handling
• Measurement:
  Minimum Arm Length: 16 5/8"
  Maximum Arm Length: 18 5/8"
  (measured center hole to center hole)

Application:

For 2009-2014 Acura TSX
For 2009-2014 Acura TL
For 2008-2017 Honda Accord

Remark: The Adjustable Rear Camber Arm by itself allows camber change of up to +/-1 degree

Installation: Recommendation: Change all 3 arms for optimal adjustments MRC-HA-0114 Camber / MRS-HA-0171 Toe / MRS-HA-0180 Traction.
HA-0114 Camber Arm allows camber change of up to +/-1 Degree. HA-0171 Toe Arm and HA-0180 Traction Arm may be required if more than 1 degree change is required. Each single arm is also an ideal replacement arm for a damaged arm. Attention: Toe will change as you adjust camber with this control arm

Product Content:

• 1 Pair x Camber Kit (Left & Right)

The product does not come with manual/instruction, Professional Install Recommended

Cross Reference Number:

• MRC-HA-0114, MRCHA0114