Megan Universal Air Ride Lowering Link Kit (10mm Ball Size) For BMW 16+ 7-Series/19+ X7/Audi A8 S8

Application:
For 2017-2018 BMW 740e xDrive (G11/G12)
For 2016-2023 BMW 740i (G11/G12)
For 2017-2022 BMW 740i xDrive (G11/G12)
For 2017 BMW 740Le xDrive (G11/G12)
For 2020-2022 BMW 745e (G11/G12)
For 2020-2022 BMW 745e xDrive (G11/G12)
For 2020-2022 BMW 745Le xDrive (G11/G12)
For 2016-2019 BMW 750i (G11/G12)
For 2016-2022 BMW 750i xDrive (G11/G12)
For 2016-2019 BMW 750Li (G11/G12)
For 2017-2022 BMW 750Li xDrive (G11/G12)
For 2019-2022 BMW X7 (G07)
For 2016 Audi A8 w/Air Suspension
For 2015-2023 Audi A8 Quattro w/Air Suspension
For 2015-2023 Audi S8 w/Air Suspension

Remark:
Confirmed Applications (Recommended Drop)
BMW 7-Series 2016+ -40mm Front and Rear Hub-to-Fender From OEM (25mm & 35mm studs)
BMW X7 2019+ -27mm Front, -35 Rear Hub-to-Fender From OEM (35mm & 45mm studs)
Audi A8/S8 (With Air Suspension) -20mm Front, -19 Rear Hub-to-Fender From OEM (50mm & 55mm studs)

Install Note:
Improper installation and/or adjustment may adversely affect and/or damage the lowering links and/or suspension components. Air bag suspension naturally change in equivalent spring rate and achieving an exceedingly low ride height may result in excessive "bottoming out" behavior. Please proceed with care.

Description & Feature

Factory air suspension vehicles are often difficult to modify in regards to adjusting ride height. Often owners must perform a complete coil conversion replacing the entire system. Our Air Ride Lowering Links instead basically "tricks" the vehicle's ride height sensors in order to achieve this. By lengthening or shortening the length of the links, the raising or lowering the vehicle's ride height is adjusted with ease.

Megan Racing MRC Lowering Link Kit will work with any vehicle using a 10mm ball cup ride height sensor and also comes with several length studs in order to comply with varying applications. All hardware is treated to help prevent corrosion during the harshest weather conditions and are protected with a 1-year warranty against manufacturer defects.

• Material: Steel Alloy
• Color: Silver
• Style:
• Placement: Front||Rear||Left||Right
• Ball Size 10mm
• Lowering Link Kit will work with any vehicle using a 10mm ball cup ride height sensor
• comes with several length studs in order to comply with varying applications
• Off Road Use ONLY

Product Content:
4 Pair of Ball Sockets
4x 25mm Studs
4x 35mm Studs
4x 45mm Studs
4x 50mm Studs
4x 55mm Studs

No Instruction, Professional Install Recommended

Cross Reference Number:
MRC-BM-0401, MRC-BM-0401, MRCBM0401